Enabling Devices 1521 Instrukcja Użytkownika Pobierz pdf (Strona 10)

RPM1521

2-2 Setup-Procedure

The minimum requirement to operate the RPM1521 is to setup the IP Address, subnet

mask, and the gateway. The IP Search Utility program supports most Windows

Operating Systems (Windows NT4.0, 2000, 2003, XP, Vista, 7).

There are two ways to perform the Setup-Procedure:

1. Open a web browser and input the default IP address. Then open the Network page

and input the information.

2. Use the IP Search Utility program (on the CD).

The default settings are:

IP address: 192.168.1.10

Subnet mask: 255.255.255.0

Gateway address: 192.168.1.1

Account name: admin (lower case)

Password: admin (lower case)

1. The workstation and the RPM1521 must be in the same LAN to perform the

Setup-Procedure.

2. The Windows Firewall must be turned off to operate the IP Search Utility program.

3. From the Start menu select the Control Panel.

4. Select the Windows Firewall.

5. Select Off and then click the OK button.

6. Put the RPM1521’s CD (provided) in the CD-ROM drive.

7. Launch the IP Search Utility program.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Brak uwag

Enabling Devices 1521 Instrukcja Użytkownika Strona 10